Welcome to 3Leavedcart.com
Collect voucher

0 item

Mega2560 R3 board with ATmega2560 MCU for Arduino

Item NO: 3LST010217

Model NO: Mega2560


Favorable Application: this board has rich IO pins and bigger memory size for more complicated or large scale application.

Additional Offer: Free USB programming cable for IDE. Free study material provided to buyer.

Be the first to review this product

Only 5 left

Regular Price: S$16.00

Special Price S$12.80

Mega2560 R3 board with ATmega2560 MCU for Arduino is available for purchase in increments of 1

With this product, you earn 26 loyalty point(s).

                                                                Mega2560 board with ATmega2560 for Arduino

 This board come with free USB cable for IDE

ATmega2560 Features:


High Performance, Low Power Atmel® AVR® 8-Bit Microcontroller


Advanced RISC Architecture


– 135 Powerful Instructions – Most Single Clock Cycle Execution


– 32 × 8 General Purpose Working Registers


– Fully Static Operation


– Up to 16 MIPS Throughput at 16MHz


– On-Chip 2-cycle Multiplier


High Endurance Non-volatile Memory Segments


– 256KBytes of In-System Self-Programmable Flash


– 4Kbytes EEPROM


– 8Kbytes Internal SRAM


– Write/Erase Cycles:10,000 Flash/100,000 EEPROM


– Data retention: 20 years at 85C/ 100 years at 25C


– Optional Boot Code Section with Independent Lock Bits


• In-System Programming by On-chip Boot Program


• True Read-While-Write Operation


– Programming Lock for Software Security


• Endurance: Up to 64Kbytes Optional External Memory Space Atmel® QTouch® library support


– Capacitive touch buttons, sliders and wheels


– QTouch and QMatrix acquisition


– Up to 64 sense channels


JTAG (IEEE® std. 1149.1 compliant) Interface


– Boundary-scan Capabilities According to the JTAG Standard


– Extensive On-chip Debug Support


– Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface


Peripheral Features


– Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode


– Four 16-bit Timer/Counter with Separate Prescaler, Compare- and Capture Mode


– Real Time Counter with Separate Oscillator


– Four 8-bit PWM Channels


– 12 PWM Channels with Programmable Resolution from 2 to 16 Bits


– Output Compare Modulator


– 16-channel, 10-bit ADC


– Four Programmable Serial USART


– Master/Slave SPI Serial Interface


– Byte Oriented 2-wire Serial Interface


– Programmable Watchdog Timer with Separate On-chip Oscillator


– On-chip Analog Comparator


– Interrupt and Wake-up on Pin Change


Special Microcontroller Features


– Power-on Reset and Programmable Brown-out Detection


– Internal Calibrated Oscillator


– External and Internal Interrupt Sources


– Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby,


and Extended Standby


I/O and Packages


– 54/86 Programmable I/O Lines (ATmega1281/2561, ATmega640/1280/2560)


– 100-lead TQFP, 100-ball CBGA (ATmega640/1280/2560)


– RoHS/Fully Green


Temperature Range:


– -40C to 85C Industrial


Ultra-Low Power Consumption


– Active Mode: 1MHz, 1.8V: 500μA


– Power-down Mode: 0.1μA at 1.8V


Speed Grade:


• 0 - 16MHz @ 4.5V - 5.5V


DC power supply: 6-12VDC 2A

USB connection to PC for IDE

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Memory usage: real: 18874368, emalloc: 18381896
Code ProfilerTimeCntEmallocRealMem